vircam_detector_noise
[Recipes]

Name:
vircam_detector_noise
Purpose:
Work out the read noise and gain of a detector
Description:
The input dome flat exposures and dark exposures are used to determine the read noise and gain of a detector. The method uses two exposures of each. The dome flats and the dark frames should be done with the same exposure times. A simple statistical method is used to work out the desired values. See section 2.4 of the VIRCAM Data Reduction Library Design document for further information.
Language:
C
Parameters:
Input File Types:
The following list gives the file types that can appear in the SOF file. The word in bold is the DO category value.
Output Products:
The following list gives the output data products that are generated by this recipe.
Output QC Parameters:
Notes
None.
Fatal Error Conditions:
Non-Fatal Error Conditions:
Conditions Leading To Dummy Products:
Author:
Jim Lewis, CASU
Code Reference:
vircam_detector_noise.c


Generated on Wed Apr 10 04:01:58 2013 for VIRCAM Pipeline by  doxygen 1.5.1